Low profile Model 3 jack pad with 4" high  floor jack saddle.
Proudly made in the USA

Low Profile Model 3 Jack Pad

The Reverse Logic second generation low profile Model 3 jack pad tool incorporates a retractable, self-adjusting magnet which attaches the tool to the chassis.   The retractable magnet design compensates for small variations in the depth and shape of the jack point location hole and prevents the magnet from ever supporting the weight of the car.


This jack pad tool is 18mm thick, a full 10mm shorter than first generation Tesla Model 3 jack pad. The low profile design accommodates taller floor jack saddles and higher 2-post lift arms, especially on the lower Performance chassis. The Safety Yellow Silicone band replaces the "grip" groove on the original tools and is a visible reminder that the jack pad tools are in place.  


The Reverse Logic jack pad tools are proudly made in the USA. The tools take the guess work out of positioning a floor jack beneath the Tesla vehicle jack points. The post on the tools precisely locate the tool in the center of the jack point on the car. The tools provides a comfortable amount of clearance between the undercarriage and the rim of a floor jack saddle or the pad on the arm of a 2-post lift. The jack pad tools are not intended to be permanently installed on the car.

Combo Model S/Model X Jack Pad Tool Now Available

Unlike most American cars with pinch weld type jack points, Tesla vehicles have unique jack points with approximately one inch diameter locating holes. The Model S and Model X chassis feature injection molded jack points which are bolted to the chassis behind the front tires and ahead of the rear tires. 


This second generation Model S•X jack pad tool compensates for slight differences between the Tesla Model S and Model X vehicle jack points. The redesigned jack pad eliminates the need for two separate tools for the Model S and Model X and functions equally well in both chassis. Even though the new jack pad is 4mm taller than the original Reverse Logic Model S and Model X jack pads, a clever feature allows four tools to be stored in a compact 7" by 3" tube.


This jack pad tool is 32mm thick, which is 4mm taller than first generation Reverse Logic Tesla Model S and Model X jack pads. The increased height improves the chassis-to-floor-jack clearance provided by the jack pad. The Safety Yellow Silicone band replaces the "grip" groove on the original tools and is a visible reminder that the jack pad tools are in place. You won't be disappointed with the quality and functionality of the Reverse Logic jack pad tool for your Tesla Model S or Model X.

Combination Model S•X jack pad tools with compact storage case
Combination Model S•X jack pad tools with compact storage case

Tesla Jack Pad Tools