RR-CLR-4 in use

Rack & Lift Ramps

Full Lift Race Ramps

The RR-CLR-4 Car Lift Ramp was designed for use with scissor lifts and two-post lifts. The dimensions of the ramp are 185" long x 14" wide x 4" high. The ramps accommodate wheelbases from 85" to 115" and support up to 6,000 lbs. The Car Lift Ramp is comprised of four interlocking pieces per side with a total weight of 80 pounds

The RR-RESTYLE-16 full lift ramp is comprised of five interlocking pieces per side weighing just 220 pounds. The dimensions of the ramp are 225" long x 16" wide x 14" high. The ramps accommodate wheelbases from 82" to 128" and support up to 6,000 pounds. The ramp system includes one set of 10 degree inclines with additional sets of inclines available for interlocking to the front of the ramp system and allowing a vehicle to make a forward descent off the ramps.

The Restyler Ramp is a portable system that can be used in a shop as well as on-the-go at other job locations. The inspiration for the Restyler Ramp derived from seeing the auto detail market's enthused use of Race Ramps' Portable Pit Stop, a full vehicle lift ramp system originally conceived for trackside vehicle maintenance, auto shops and car displays.

Car Lift Ramps and Restyler Ramps are manufactured with Race Ramps' patented 100% solid core construction that provides strength, durability and versatility - all while being lightweight for easy transport and maneuverability. All ramps are finished with a durable coating which prevents slipping, sliding or scooting on any surface. The ramps will not scratch or mark-up floors.

Rack Ramps

Rack Ramps are designed to either replace or supplement the metal ramps which are normally used with 4-post lifts. The primary benefit of the Race Ramps alternative over steel ramps is significantly lower weight. In most cases the Race Ramps also reduce the angle of approach.

Camaro on RR-RESTYLE-16
RR-RACK-4 in use
RR-RACK-5 in use
RR-RACK-HN in use

Full Lift Restyler Ramps

SKU RR-RESTYLE-16.
$1,649.00
In stock
1
Product Details

Comprised of five interlocking pieces per side (10 pieces total in each set), the Restyler Ramp handles up to a 6,000 pound vehicle while weighing just 220 lbs total. The ramp system includes one set of inclines. The Restyler Ramp is a portable system that can be used in a shop as well as at job locations in the field.


An optional XTender is available for low ground clearance vehicles. The XTender decreases the initial incline to 6.8˚. See detailed images to the right for pictures of the XTenders in use.


The Restyler Ramp System is shipped via LTL freight on one pallet. Shipping charges will be invoiced separately after an order is placed for the ramps. Estimated freight charges range from $200 to $400 depending upon the delivery destination. Call or write to discuss possible arrangements to pick up the RR-RESTYLE-16 ramps.


Price does not include shipping to International Destinations. Please request a quote by e-mail.

Save this product for later