RR-CLR-4 in use

Rack & Lift Ramps

Full Lift Race Ramps

The RR-CLR-4 Car Lift Ramp was designed for use with scissor lifts and two-post lifts. The dimensions of the ramp are 185" long x 14" wide x 4" high. The ramps accommodate wheelbases from 85" to 115" and support up to 6,000 lbs. The Car Lift Ramp is comprised of four interlocking pieces per side with a total weight of 80 pounds

The RR-RESTYLE-16 full lift ramp is comprised of five interlocking pieces per side weighing just 220 pounds. The dimensions of the ramp are 225" long x 16" wide x 14" high. The ramps accommodate wheelbases from 82" to 128" and support up to 6,000 pounds. The ramp system includes one set of 10 degree inclines with additional sets of inclines available for interlocking to the front of the ramp system and allowing a vehicle to make a forward descent off the ramps.

The Restyler Ramp is a portable system that can be used in a shop as well as on-the-go at other job locations. The inspiration for the Restyler Ramp derived from seeing the auto detail market's enthused use of Race Ramps' Portable Pit Stop, a full vehicle lift ramp system originally conceived for trackside vehicle maintenance, auto shops and car displays.

Car Lift Ramps and Restyler Ramps are manufactured with Race Ramps' patented 100% solid core construction that provides strength, durability and versatility - all while being lightweight for easy transport and maneuverability. All ramps are finished with a durable coating which prevents slipping, sliding or scooting on any surface. The ramps will not scratch or mark-up floors.

Rack Ramps

Rack Ramps are designed to either replace or supplement the metal ramps which are normally used with 4-post lifts. The primary benefit of the Race Ramps alternative over steel ramps is significantly lower weight. In most cases the Race Ramps also reduce the angle of approach.

Camaro on RR-RESTYLE-16
RR-RACK-4 in use
RR-RACK-5 in use
RR-RACK-HN in use

12" High Cradle Top Platform Service/Inspection Ramps

SKU RLL-116-3-14HD
In stock
Product Details

The RLL-116-3 ramp is a three section ramp with three progressively steeper inclines. The center section has tapered ends to make it easier to remove once the car is on the ramps. An optional 32" extension is available for longer wheelbase cars. All of the sections are less than 48" long and the ramp can be transported in a mid-size SUV or short-bed pickup. This ramp was developed to meet the requirements of customers wanting to service or inspect very low ground clearance cars in the field. This ramp is only available in a heavy duty version (2500# per tire capacity). It features a double textured bottom surface and includes a pair of Race Ramps wheel chocks.

For very low ground clearance cars, it may not be possible to lift one end 12" without scraping the other end on the ground. This RLL-116-3 ramp addresses this issue by simultaneously lifting both axles. While this ramp does not provide a full level lift, it does raise one axle 12" and the other axle 3" to 5" which is typically enough to roll a floor jack under the lower end. The RLL-116-3 model Race Ramps (and extension if necessary) are like service ramps with integrated Roll-ups.

This ramp model can be shipped via FedEx or UPS Ground service to any destination in the Continental USA.

Price does not include shipping to International Destinations. Please request a quote by e-mail.

Save this product for later