Rack & Lift Ramps
Full Lift Race Ramps
The RR-CLR-4 Car Lift Ramp was designed for use with scissor lifts and two-post lifts. The dimensions of the ramp are 185" long x 14" wide x 4" high. The ramps accommodate wheelbases from 85" to 115" and support up to 6,000 lbs. The Car Lift Ramp is comprised of four interlocking pieces per side with a total weight of 80 pounds
The RR-RESTYLE-16 full lift ramp is comprised of five interlocking pieces per side weighing just 220 pounds. The dimensions of the ramp are 225" long x 16" wide x 14" high. The ramps accommodate wheelbases from 82" to 128" and support up to 6,000 pounds. The ramp system includes one set of 10 degree inclines with additional sets of inclines available for interlocking to the front of the ramp system and allowing a vehicle to make a forward descent off the ramps.
The Restyler Ramp is a portable system that can be used in a shop as well as on-the-go at other job locations. The inspiration for the Restyler Ramp derived from seeing the auto detail market's enthused use of Race Ramps' Portable Pit Stop, a full vehicle lift ramp system originally conceived for trackside vehicle maintenance, auto shops and car displays.
Car Lift Ramps and Restyler Ramps are manufactured with Race Ramps' patented 100% solid core construction that provides strength, durability and versatility - all while being lightweight for easy transport and maneuverability. All ramps are finished with a durable coating which prevents slipping, sliding or scooting on any surface. The ramps will not scratch or mark-up floors.
Rack Ramps are designed to either replace or supplement the metal ramps which are normally used with 4-post lifts. The primary benefit of the Race Ramps alternative over steel ramps is significantly lower weight. In most cases the Race Ramps also reduce the angle of approach.