Nissan GT-R jack pad tool

Nissan GT-R Jack Pad Tool

When inserted into the pockets of the GT-R jack points the R35 jack pad tool protects the side skirts and undercarriage from being damaged by a floor jack. When used in sets of four, the R35JPT tools obviate the need for the special lifts used by authorized Nissan GT-R dealers. The GT-R tool uses Silicone plugs to hold the jack pad tool in place while a floor jack or the arms of a four-arm lift are maneuvered into place under the jack point. The base on the aluminum tools for the R35 chassis is 63mm in diameter and requires a floor jack with a 3" diameter saddle.

Jack Stand Blocks for Torin T43004 (Pair)

SKU JB52-30-28
$34.95
Out of stock
1
Product Details

Customers who already own a set of Torin (or equivalent) aluminum jack stands with a flat top saddle can use these 52mm by 30mm by 28mm aluminum blocks to adapt the jack stands for use with BMW, MB, or Nissan GT-R jack points. The blocks include 40mm long headless bolts. A 10.1mm diameter hole must be drilled through the center of the jack stand saddle in order to use the blocks. Sold in pairs.

ALWAYS USE JACK STANDS IN PAIRS. DO NOT SUPPORT YOUR CAR WITH ONE, THREE, OR FOUR JACK STANDS. USE WHEEL CHOCKS IN FRONT AND BEHIND THE WHEELS ON THE GROUND.

Save this product for later