Pivot-Top jack stand post

Pivot-Top™ Posts for ESCO Jack Stands

The factory ESCO  jack stands have a large 4.25" diameter rubber padded flat top that won't damage the jack points on your high end luxury car. In addition to the rubber padded posts, Reverse Logic offers a custom Pivot-Top™ post with a pivoting block which fits the jack points on BMW, Mercedes-Benz, and Nissan GT-R chassis.

The posts can be used with ESCO 10498 or 10499 jack stands. Since the jack stands are positioned inside the vehicle jack pocket, they will be in the ideal location for supporting the weight of the car and won’t damage the jack points.

ALWAYS USE JACK STANDS IN PAIRS. DO NOT SUPPORT YOUR CAR WITH ONE, THREE, OR FOUR JACK STANDS. USE WHEEL CHOCKS IN FRONT AND BEHIND THE WHEELS ON THE GROUND.

Reverse Logic also offers blocks for Torin T43004 aluminum jack stands which will fit into the plastic jack points on late model BMW, MINI, Mercedes-Benz, and Nissan GT-R chassis. It is necessary to drill a 10mm hole in the Torin jack stand saddle to use the blocks.

Jack Stand Blocks for Torin T43004 (Pair)

SKU JB52-30-28
$34.95
Out of stock
1
Product Details

Customers who already own a set of Torin (or equivalent) aluminum jack stands with a flat top saddle can use these 52mm by 30mm by 28mm aluminum blocks to adapt the jack stands for use with BMW, MB, or Nissan GT-R jack points. The blocks include 40mm long headless bolts. A 10.1mm diameter hole must be drilled through the center of the jack stand saddle in order to use the blocks. Sold in pairs.

ALWAYS USE JACK STANDS IN PAIRS. DO NOT SUPPORT YOUR CAR WITH ONE, THREE, OR FOUR JACK STANDS. USE WHEEL CHOCKS IN FRONT AND BEHIND THE WHEELS ON THE GROUND.

Save this product for later