Tesla Model Y jack pad
Jack pad tool in Tesla Model Y chassis.

Chassis Specific Jack Pads

Do-it-yourselfers who are passionate about their cars will appreciate the innovative and practical solution that Reverse Logic jack pad tools offer. Most of our chassis specific tools hang from the jack points of your car and prevent damage to the side skirts and undercarriage of your car while using a floor jack.

Our tools with spring loaded bullet latches fit many Mercedes-Benz chassis introduced after the 2000 model year. Late model BMW, MINI Cooper, Mercedes-Benz chassis and the Nissan GT-R will accept our jack pad tools with silicone plugs which retain the tools in place.

Our jack pad tool for Corvette C5/C6/C7/C8 chassis allows the tool to be used in one of two ways. It can be suspended from the jack point or secured in place for extended maintenance periods.

The jack pad tool for Porsche uses a custom T-nut sized to fit the oval hole in the jack point of Porsche 964, 991, 996, 986, 997, 987, and 981 chassis.

Tesla Model S•X and Model 3•Y chassis specific jack pad tools are the latest addition to the Reverse Logic jack pad product line. More details about the tools are available in the drop down menu selections under Jack Pads.

Pair of Combo Model 3•Y Low Profile Pads

SKU T-M3-LP-M x2
In stock
Product Details

This second generation Model 3 jack pad tool incorporates a retractable, self-adjusting magnet which attaches the tool to the chassis. This jack pad tool also fits the Model Y chassis. The captive magnet extends 5mm above the top of the post when inserted into the jack point. It makes an audible click indicating that the tool is properly inserted. The Model 3 vehicle jack points are an aluminum stamping and are not nearly as precise as the Model S or Model X injection molded jack points. The retractable magnet design compensates for small variations in the depth and shape of the jack point location hole and precludes the magnet from ever supporting the weight of the car. The Silicone O-ring stabilizes the tool in the jack point socket and helps to maintain the magnet-to-chassis contact patch.

The Reverse Logic jack pad tool for the Tesla Model 3 chassis is proudly made in the USA. This tool takes the guess work out of positioning a floor jack beneath the vehicle jack points. The post on the tool precisely locates the tool in the center of the jack point on the car. The tool provides a comfortable amount of clearance between the undercarriage and the rim of a floor jack saddle or the pad on the arm of a 2-post lift. The LDPE washer protects the painted surface of the jack point from being damaged. The jack pad tools are not intended to be permanently installed on the car.

This jack pad tool is 18mm thick, a full 10mm shorter than first generation Reverse Logic Tesla Model 3 jack pad. The low profile design accommodates taller floor jack saddles and higher 2-post lift arms, especially on the lower Performance chassis. The Safety Yellow Silicone band replaces the "grip" groove on the original tools and is a visible reminder that the jack pad tools are in place.

Unlike some competing tools with an abrasive top surface, the Reverse Logic tool features an LDPE washer that prevents damage to the painted surface of the Model 3 jack points. The simple round design guarantees that the tool will be inserted into the jack point correctly, whereas, rectangular shaped tools can be inadvertently inserted with the incorrect orientation. You won't be disappointed with the quality and functionality of the Reverse Logic jack pad tool for your Tesla Model 3.

The tools are sold in pairs (2) or in sets of four (4). A handy storage case is included at no additional charge with each set of four (4) jack pad tools.

Save this product for later