Corvette Jack Pads

Corvette jack pad tool
Corvette jack pad components
Corvette pad with lift arm

Jack pad assures adequate car-to-lift-arm clearance

The Reverse Logic Corvette jack pad tool increases the clearance between the side skirts and the rim of a floor jack saddle or the arms on a four-arm lift. The tool can be used in two modes. When the Nylon spacer is installed between the puck and the T-nut, the jack pad can be used in the conventional manner where it simply hangs from the chassis. In this mode all five of the tool components are used.

Read More

Optional 15mm Extension

A 15mm thick extension can be used with the standard Jack Pad Tool to provide additional floor jack or lift arm clearance for cars with very low side skirts. The extension is supplied with a 55mm long M8x1.25 bolt which replaces the 40mm long bolt included with the standard tool.

Jack Pad Tool Extension for C5/C6/C7/C8 Corvette

SKU C15-EXT
$13.45
Out of stock
1
Product Details

The C15-EXT is a 15mm thick extension which can be used in conjunction with our standard C28-63 Jack Pad Tool. The extension is supplied with a 55mm long M8x1.25 bolt which replaces the 40mm long bolt supplied with the standard tool. This extension provides additional floor jack or lift arm clearance for cars with very low side skirts.

This tool must be used with a floor jack which has at least a 2.5" diameter saddle.

Save this product for later